Dec 13, 2024 Detailed New 300-710 Exam Questions for Concept Clearance
300-710 Exam Preparation Material with New 300-710 Dumps Questions.
Cisco 300-710 exam is designed for professionals who are interested in validating their knowledge and skills in securing networks with Cisco Firepower. Securing Networks with Cisco Firepower certification exam is part of the Cisco Certified Network Professional (CCNP) Security certification track and is intended for professionals who are responsible for configuring, deploying, and managing Cisco Firepower solutions. 300-710 exam measures the candidate's ability to use Cisco Firepower Next-Generation Firewall (NGFW), Cisco Firepower Management Center (FMC), and Cisco Firepower Threat Defense (FTD) to secure networks.
Cisco 300-710: Securing Networks with Cisco Firepower exam is one of the most sought-after certifications in the field of network security. Securing Networks with Cisco Firepower certification is designed to help professionals enhance their skills and knowledge in securing networks with Cisco Firepower solutions. 300-710 exam validates the understanding of individuals in configuring, deploying, and managing Cisco Firepower NGIPS and NGFW solutions.
NEW QUESTION # 67
Which connector is used to integrate Cisco ISE with Cisco FMC for Rapid Threat Containment?
- A. pxGrid
- B. ISEGrid
- C. FTD RTC
- D. FMC RTC
Answer: A
NEW QUESTION # 68
Which command must be run to generate troubleshooting files on an FTD?
- A. system support view-files
- B. system generate-troubleshoot all
- C. show tech-support
- D. sudo sf_troubleshoot.pl
Answer: D
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/security/sourcefire-defense-center/117663-technote-SourceFire-00.html
NEW QUESTION # 69
Which two OSPF routing features are configured in Cisco FMC and propagated to Cisco FTD? (Choose two.)
- A. SHA authentication to OSPF packets
- B. area boundary router type 1 LSA filtering
- C. OSPFv2 with IPv6 capabilities
- D. virtual links
- E. MD5 authentication to OSPF packets
Answer: B,D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/ospf_for_firepower_threat_defense.html
NEW QUESTION # 70
After deploying a network-monitoring tool to manage and monitor networking devices in your organization, you realize that you need to manually upload an MIB for the Cisco FMC. In which folder should you upload the MIB file?
- A. /sf/etc/DCEALERT.MIB
- B. system/etc/DCEALERT.MIB
- C. /etc/sf/DCMIB.ALERT
- D. /etc/sf/DCEALERT.MIB
Answer: D
NEW QUESTION # 71
Remote users who connect via Cisco AnyConnect to the corporate network behind a Cisco FTD device report that they get no audio when calling between remote users using their softphones. These same users can call internal users on the corporate network without any issues. What is the cause of this issue?
- A. The hairpinning feature is not available on FTD.
- B. The Enable Spoke to Spoke Connectivity through Hub option is not selected on FTD.
- C. FTD has no NAT policy that allows outside to outside communication
- D. Split tunneling is enabled for the Remote Access VPN on FTD
Answer: A
NEW QUESTION # 72
Refer to the exhibit.
An engineer is modifying an access control policy to add a rule to Inspect all DNS traffic that passes it making the change and deploying the policy, they see that DNS traffic Is not being Inspected by the Snort engine. What is......
- A. The rule Is configured with the wrong setting for the source port.
- B. The rule must specify the security zone that originates the traffic.
- C. The rule must define the source network for inspection as well as the port.
- D. The action of the rule is set to trust instead of allow.
Answer: D
NEW QUESTION # 73
What is the maximum SHA level of filtering that Threat Intelligence Director supports?
- A. SHA-512
- B. SHA-256
- C. SHA-4096
- D. SHA-1024
Answer: B
Explanation:
Section: Integration
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/623/configuration/guide/fpmc-config- guide-v623/cisco_threat_intelligence_director__tid_.html
NEW QUESTION # 74
What is the role of realms in the Cisco ISE and Cisco FMC integration?
- A. TACACS+ database
- B. Cisco Secure Firewall VDC
- C. AD definition
- D. Cisco ISE context
Answer: C
Explanation:
In the integration between Cisco Identity Services Engine (ISE) and Cisco Firewall Management Center (FMC), realms are used to define the Active Directory (AD) configuration. Realms in FMC specify the AD servers, domain, and other authentication settings necessary to authenticate and authorize users.
Steps to configure realms:
* In FMC, navigate to System > Integration > Realms and Directory.
* Add a new realm and configure the AD settings.
* Ensure the realm settings match the AD environment for seamless integration.
Realms are essential for integrating AD with FMC, allowing the firewall to use AD for user authentication and policy enforcement.
References: Cisco Secure Firewall Management Center Administrator Guide, Chapter on Realms and Directory Integration.
NEW QUESTION # 75
A network engineer is configuring URL Filtering on Cisco FTD. Which two port requirements on the FMC must be validated to allow communication with the cloud service? (Choose two.)
- A. inbound port TCP/80
- B. inbound port TCP/443
- C. outbound port TCP/443
- D. outbound port TCP/80
- E. outbound port TCP/8080
Answer: C,D
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Security__Internet_Access__and_Communication_Ports.html
NEW QUESTION # 76
In which two ways do access control policies operate on a Cisco Firepower system? (Choose two.)
- A. The system performs a preliminary inspection on trusted traffic to validate that it matches the trusted parameters.
- B. The system performs intrusion inspection followed by file inspection.
- C. File policies use an associated variable set to perform intrusion prevention.
- D. They can block traffic based on Security Intelligence data.
- E. Traffic inspection can be interrupted temporarily when configuration changes are deployed.
Answer: D,E
NEW QUESTION # 77
When creating a report template, how can the results be limited to show only the activity of a specific subnet?
- A. Add an Input Parameter in the Advanced Settings of the report, and set the type to Network/IP.
- B. Create a custom search in Firepower Management Center and select it in each section of the report.
- C. Select IP Address as the X-Axis in each section of the report.
- D. Add a Table View section to the report with the Search field defined as the network in CIDR format.
Answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firesight/541/user-guide/FireSIGHT-System-UserGuide-v5401/Reports.html#87267
NEW QUESTION # 78
An engineer is building a new access control policy using Cisco FMC. The policy must inspect a unique IPS policy as well as log rule matching. Which action must be taken to meet these requirements?
- A. Configure an IPS policy and enable per-rule logging.
- B. Disable the default IPS policy and enable per-rule logging.
- C. Disable the default IPS policy and enable global logging.
- D. Configure an IPS policy and enable global logging.
Answer: A
NEW QUESTION # 79
An organization is installing a new Cisco FTD appliance in the network. An engineer is tasked with configuring access between two network segments within the same IP subnet. Which step is needed to accomplish this task?
- A. Assign an IP address to the Bridge Virtual Interface.
- B. Permit BPDU packets to prevent loops.
- C. Add a separate bridge group for each segment.
- D. Specify a name for the bridge group.
Answer: A
NEW QUESTION # 80 
Refer to the exhibit. An engineer is analyzing the Attacks Risk Report and finds that there are over 300 instances of new operating systems being seen on the network. How is the Firepower configuration updated to protect these new operating systems?
- A. Cisco Firepower automatically updates the policies.
- B. The administrator manually updates the policies.
- C. The administrator requests a Remediation Recommendation Report from Cisco Firepower.
- D. Cisco Firepower gives recommendations to update the policies.
Answer: D
Explanation:
Section: Management and Troubleshooting
NEW QUESTION # 81
administrator is configuring SNORT inspection policies and is seeing failed deployment messages in Cisco FMC . What information should the administrator generate for Cisco TAC to help troubleshoot?
- A. A "show tech" file for the device in question
- B. A "show tech" for the Cisco FMC.
- C. A "troubleshoot" file for the Cisco FMC
- D. A Troubleshoot" file for the device in question.
Answer: D
NEW QUESTION # 82
An organization is setting up two new Cisco FTD devices to replace their current firewalls and cannot have any network downtime During the setup process, the synchronization between the two devices is failing What action is needed to resolve this issue?
- A. Confirm that both devices have the same port-channel numbering
- B. Confirm that both devices are configured with the same types of interfaces
- C. Confirm that both devices are running the same software version
- D. Confirm that both devices have the same flash memory sizes
Answer: C
NEW QUESTION # 83
Refer to the exhibit An engineer is modifying an access control pokey to add a rule to inspect all DNS traffic that passes through the firewall After making the change and deploying the pokey they see that DNS traffic is not bang inspected by the Snort engine What is the problem?
- A. The rule is configured with the wrong setting for the source port
- B. The rule must specify the security zone that originates the traffic
- C. The rule must define the source network for inspection as well as the port
- D. The action of the rule is set to trust instead of allow.
Answer: D
NEW QUESTION # 84
Which two routing options are valid with Cisco Firepower Threat Defense? (Choose two.)
- A. BGPv4 in transparent firewall mode
- B. ECMP with up to three equal cost paths across multiple interfaces
- C. BGPv6
- D. ECMP with up to three equal cost paths across a single interface
- E. BGPv4 with nonstop forwarding
Answer: C,D
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/601/configuration/guide/fpmc-config-guide-v601/fpmc-config-guide-v60_chapter_01100011.html#ID-2101-0000000e
NEW QUESTION # 85
What is an advantage of adding multiple inline interface pairs to the same inline interface set when deploying an asynchronous routing configuration?
- A. Allows the IPS to identify inbound and outbound traffic as part of the same traffic flow.
- B. Allows traffic inspection to continue without interruption during the Snort process restart.
- C. The interfaces disable autonegotiation and interface speed is hard coded set to 1000 Mbps.
- D. The interfaces are automatically configured as a media-independent interface crossover.
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/601/configuration/guide/fpmc-config-guide-v601/fpm
NEW QUESTION # 86
What is the result when two users modify a VPN policy at the same lime on a Cisco Secure Firewall Management Center managed device?
- A. The changes from both users will be merged together into the policy.
- B. The first user locks the configuration when selecting edit on the policy.
- C. The system prevents modifications to the policy by multiple users.
- D. Both users can edit the policy arid the last saved configuration persists.
Answer: B
Explanation:
In Cisco Secure Firewall Management Center (FMC), when two users attempt to modify a VPN policy simultaneously, the system implements a locking mechanism to prevent conflicts. The first user who selects edit on the policy locks the configuration, preventing other users from making changes until the lock is released.
Steps:
* When the first user selects edit on the VPN policy, FMC locks the policy for editing.
* The lock ensures that only the first user can make changes.
* Once the first user saves or cancels their changes, the lock is released.
* Other users can then edit the policy.
This locking mechanism ensures that configuration conflicts are avoided and only one set of changes is applied at a time.
References: Cisco Secure Firewall Management Center Configuration Guide, Chapter on Policy Management and User Permissions.
NEW QUESTION # 87
Which two conditions must be met to enable high availability between two Cisco FTD devices? (Choose two.)
- A. same DHCP/PPoE configuration
- B. same number of interfaces
- C. same flash memory size
- D. same NTP configuration
- E. same host name
Answer: B,D
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/firepower-management-center/212699-configure-ftd-high-a Conditions In order to create an HA between 2 FTD devices, these conditions must be met:
Same model
Same version (this applies to FXOS and to FTD - (major (first number), minor (second number), and maintenance (third number) must be equal)) Same number of interfaces Same type of interfaces Both devices as part of same group/domain in FMC Have identical Network Time Protocol (NTP) configuration Be fully deployed on the FMC without uncommitted changes Be in the same firewall mode: routed or transparent.
Note that this must be checked on both FTD devices and FMC GUI since there have been cases where the FTDs had the same mode, but FMC does not reflect this.
Does not have DHCP/Point-to-Point Protocol over Ethernet (PPPoE) configured in any of the interface Different hostname (Fully Qualified Domain Name (FQDN)) for both chassis. In order to check the chassis hostname navigate to FTD CLI and run this command
NEW QUESTION # 88
An organization has a Cisco IPS running in inline mode and is inspecting traffic for malicious activity. When traffic is received by the Cisco IRS, if it is not dropped, how does the traffic get to its destination?
- A. It is routed back to the Cisco ASA interfaces for transmission.
- B. It is retransmitted from the Cisco IPS inline set.
- C. It is transmitted out of the Cisco IPS outside interface.
- D. The packets are duplicated and a copy is sent to the destination.
Answer: B
NEW QUESTION # 89
Which protocol establishes network redundancy in a switched Firepower device deployment?
- A. HSRP
- B. GLBP
- C. STP
- D. VRRP
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/firepower_threat_defense_high_availability.html
NEW QUESTION # 90
......
300-710 2024 Training With 324 QA's: https://pass4sure.verifieddumps.com/300-710-valid-exam-braindumps.html
